• 🔖 It looks like you are browsing the site as a guest. By registering on the site you can participate on the Internet's largest Polaris Ranger XD 1500 forum. To register, simply Click Here!

My ride

oneal

Active member
Jun 17, 2024
447
232
Finally finished mounting lights, thought I would post
 

Attachments

  • IMG_1199.jpeg
    IMG_1199.jpeg
    820.3 KB · Views: 10
  • IMG_1198.jpeg
    IMG_1198.jpeg
    1.3 MB · Views: 11
  • IMG_1184.jpeg
    IMG_1184.jpeg
    1.3 MB · Views: 10
  • IMG_1189.jpeg
    IMG_1189.jpeg
    1.3 MB · Views: 20
  • IMG_1196.jpeg
    IMG_1196.jpeg
    1.1 MB · Views: 11
  • IMG_1197.jpeg
    IMG_1197.jpeg
    225.3 KB · Views: 13
  • IMG_1203.jpeg
    IMG_1203.jpeg
    1,000.5 KB · Views: 14
  • IMG_1204.jpeg
    IMG_1204.jpeg
    1.2 MB · Views: 8
  • IMG_1208.jpeg
    IMG_1208.jpeg
    1.1 MB · Views: 17
  • IMG_1205.jpeg
    IMG_1205.jpeg
    1.5 MB · Views: 12
  • IMG_1207.jpeg
    IMG_1207.jpeg
    153.3 KB · Views: 9
  • 20240903_130141.jpeg
    20240903_130141.jpeg
    15.6 KB · Views: 7
Oneal - Great looking rig, very tastefully outfitted. I can see you have no shortage of lights.
 
Yes, I have a light fetish. The Hellas are 19 years old, been on 3 SxS's and 2 jeeps. The light bar is a Rigid adapt, 12 years old and also been on several different machines.
Thanks for the kind remarks Big Red
 
  • Like
Reactions: JCX
looks great! I agree you can never have enough light!
 
Nice rig where is your winch rope
Thanks,
First time I was going to use the winch it was wound so tight I had to beat the pin out of the hook to release the tension on the rope, too tight to release the clutch. Push the button or the remote all it would do is operate the solenoid, power to the motor but no movement. It had a half dozen revolutions backwards. My wife reminded me when my son's knees were against the dash control and how she had WARNED me he was operating it. I am now certain his knee was pressing "unwind" , it went backwards until the rope wound around itself , bound, and fried the motor.
When I installed the forward a-arms I had to remove the winch to access the pivot bolts so I took it to the bench and removed the motor. It made the shop smell like fried electrical stench.
Not sure if I will pursue a new motor or different brand winch.
 
Last edited:
Back
Top