• 🔖 It looks like you are browsing the site as a guest. By registering on the site you can participate on the Internet's largest Polaris Ranger XD 1500 forum. To register, simply Click Here!

Hydraulic plow lift update

pueblogary

pueblogary

Member
Aug 3, 2024
49
14
Our dealership is working with Polaris to resolve the problem with the hydraulic plow lift for the Glacier Pro HD Plow Blade - 84" Steel. The hydraulic plow lift actuator is not powerful enough for this plow even though it’s specified for the 84” plow.
They tried the plow angle actuator, which works fine, in the lift frame work. It gave the same underpowered results.
Yesterday I looked up the plow lift in the Polaris catalog. It shows that it will be available in January, 2025! This makes me wonder if they know that the first models were under engineered.
The dealership representative was getting pushback from Polaris that there was a problem, so a video was sent to them.
I will update this situation when new information is learned.
IMG_0044.jpeg
 
pueblogary said:
Our dealership is working with Polaris to resolve the problem with the hydraulic plow lift for the Glacier Pro HD Plow Blade - 84" Steel. The hydraulic plow lift actuator is not powerful enough for this plow even though it’s specified for the 84” plow.
They tried the plow angle actuator, which works fine, in the lift frame work. It gave the same underpowered results.
Yesterday I looked up the plow lift in the Polaris catalog. It shows that it will be available in January, 2025! This makes me wonder if they know that the first models were under engineered.
The dealership representative was getting pushback from Polaris that there was a problem, so a video was sent to them.
I will update this situation when new information is learned.
View attachment 1262
Click to expand...
Update to the above:
Polaris says that the wrong hydraulic units were used initially for these kits. They don’t have a timeframe for when the new cylinders will be available.
FYI — the wrong hydraulic units are KYB MMP5 models.

So the dealership is removing my hydraulic plow lift until the new models are available. I’ll be using my winch, but I will install a turning block on the plow and lead the hook to an attachment on the bumper. This will reduce the speed of the plow motion and reduce the power needed to raise the plow.
 
pueblogary said:
Update to the above:
Polaris says that the wrong hydraulic units were used initially for these kits. They don’t have a timeframe for when the new cylinders will be available.
FYI — the wrong hydraulic units are KYB MMP5 models.

So the dealership is removing my hydraulic plow lift until the new models are available. I’ll be using my winch, but I will install a turning block on the plow and lead the hook to an attachment on the bumper. This will reduce the speed of the plow motion and reduce the power needed to raise the plow.
Click to expand...
Might want to give it a try without the turning block first (or maybe you already did?) I find the 6000 lb. winch to have more than enough power for the plow and the speed to be about perfect for me. I not saying you shouldn't do it I'm just suggesting you test it the normal way first if you haven't already done so.
 
I just installed this exact unit. It seems to work fine. Only problem I encountered is my 4 position rocker switch doesn’t make contact to lower the plow. The switch isn’t available till January. lol.

I suspect once there is snow stuck o. The frame it won’t have the power. The lift cylinder is loud!
 
Big Red said:
Might want to give it a try without the turning block first (or maybe you already did?) I find the 6000 lb. winch to have more than enough power for the plow and the speed to be about perfect for me. I not saying you shouldn't do it I'm just suggesting you test it the normal way first if you haven't already done so.
Click to expand...
I did try using the winch and it’s way too fast — no fine control. I already have a heavy duty snatch block, from my sailboat that was trashed by hurricane Ivan years ago.
 
Clubin said:
I just installed this exact unit. It seems to work fine. Only problem I encountered is my 4 position rocker switch doesn’t make contact to lower the plow. The switch isn’t available till January. lol.

I suspect once there is snow stuck o. The frame it won’t have the power. The lift cylinder is loud!
Click to expand...
I would appreciate it if you would post a photo of the label on your hydraulic lift cylinder. Here’s a pic of mine:
IMG_9993.jpeg
 
image.jpg

Does your plough have the two separate positions for the nylon strap to hook on? In the instructions it does not show two.
 
Yeah, terribly slow! Mine would only lift half way. Had my wife work the controller while I lifted the plow, and then it went all the way up. If there was a snow load on the plow it probably wouldn’t lift at all!
 
You must log in or register to reply here.
Back
Top