SDI Terrain Master 2.1 Shocks
I can confirm that the stock shocks are good enough for me. My riding sounds close to what you do.

I can confirm that the stock shocks are good enough for me. My riding sounds close to what you do.
I have the single can Northstar version with a little over 800 miles on it , 90% from riding Hatfield Mc Coy trails. Stock Shocks suck for trail riding , way too stiff, even...
Made it out a couple of weekends in a row. One weekend with some kids and family. Took the kids up to a fire watch tower. Then another weekend with adults and a couple of other...
Sorry I never check. I do know depending on what I’m doing, where I’m at, I’ve been around 170-180 and filled up. I wasn’t empty, but wasn’t about to leave camp without filling back up.
I have the single can Northstar version with a little over 800 miles on it , 90% from riding Hatfield Mc Coy trails. Stock Shocks suck for trail riding , way too stiff, even running 13/14 lbs PSI...
Thanks for the pics! Looks like a good time for sure.
My 24 clunked for the last time, a new trani is installed.
WOW.....a 24 beer job! To decrease the time by 50% drink just 6 during the install and the other 18 after it's finished 🥃
Just Voted. 2026 1500 with 1100 miles. Clunk started at about 900 miles. Called dealer an was told about the Locktie fix. Said they used this on 7 other 26's and it fixed the problem. Going to set up a shop visit for next week. The...
That’s weird. I’ve never seen that one. Maybe because the speed limiter got raised with the tune?
They fixed mine and it lasts about a month. Mine us back for third time and say they want to try locktite again. Just wondering how many miles or kms do you have on it since...
So another muffler shipped to me today. I’ll get it put on and a few miles on it. Let you all know if it’s good.
I put one on this weekend and already have a Gilomen tune and was very impressed. Only have a few miles on it.
Maybe disconnect it and see what doesn't work? Occoms Razor...
I have 2025 3 seater Northstar ultimate just had #3 coil go bad. No local dealers had one in stock. I was on a ride with a dealer and they took one off the showroom floor.
That sucks how many miles you got on it ? 1950 miles
And of course it was 1 week after the 1 year warranty. Yeah that's crazy. Always seems like that's my luck is a awesome Machine . Hard to believe 3 coils went bad at one time . I have been a...
Yeah that's crazy. Always seems like that's my luck is a awesome Machine . Hard to believe 3 coils went bad at one time . I have been a mechanic for years and that points to short or a ground that...
They have 20% off again if anyone is looking for one of their products.
It seems that while the clunking problem is universal with everyone, the "solution" is very dealer dependent. Some people have a dealer that takes it seriously and "fixes" it, while others do...
I would think most any 4.5 X 5 bolt pattern would do. Best to stick with a 15" rim with like size tire to what your running now. Agree
The "Clunk" went away...................Now that's got to be the first time I heard that one. Is this like heat stroke? "When you stop sweating, it's time for real concern..." Lol
Brought it up in the mountains today. The tune is no doubt worth it. I had it in some steep rocky terrain. You would have to be in a bad situation to need tow/haul or use the...
Nice pics...........as always the dogs are cute as hell.
Looks like fun. I saw a young corgi last week and was wondering how the pup was doing.
When driving into the wind air comes in around the steering wheel., in a cross wind mainly around door handles. I am curious if the 2026 machines are sealed better? Thanks
I’m had a 24 and traded for a 26. Air still comes in through the door handles the same as the 24. I don’t notice it coming in through the steering wheel, but most of my driving is slow.
The "Clunk" went away...................Now that's got to be the first time I heard that one.
So mine is complicated. 3 separate sets of axles. Last ones were a different part number. Locktite inner and outer splines. No more clunk. So mine doesn’t clunk but was fixed by the dealer. They...
It seems that while the clunking problem is universal with everyone, the "solution" is very dealer dependent. Some people have a dealer that takes it seriously and "fixes" it, while others do...
What is the difference in a UTV tire and a DOT tire? Is it the sidewall stiffness? DOT tires are designed to run at highway pressures - 32-45 PSI as an example range, as well as much higher loadings (at least 1750 lbs per tire as an...
I have the Mountaineer and just installed the Giloman tune today so little data. I didn't have the runway to get it to full speed but I had it at 68 and it was still climbing...
Not squirrels so much. But I do like setting up on a meadow/field and taking out some prairie dogs. Or chasing jack rabbits in the desert. Eastern Oregon is great!
Clubin - Your Ranger must be getting old........it's have to walk with a stick.
Hello everyone. My name is Phil. I live in the Boise area. Looking to buy a new or lightly used 1500XD. I joined the forum to soak up as much information as I possibly can. I live in Idaho, so im...
AI Overview The primary difference is that the BFGoodrich Mud-Terrain T/A KM3 UTV tire is designed specifically for off-road performance, often lacking formal Department of Transportation...
Which AI tool did you use for that post? 😝 Google. I copied "AI overview" in my response so you knew where it came from. I find more and more AI is the easy button to gather a lot of information...
Was preparing the exhaust for sale. Checked the spark arrestor. First time there was some debris. Second time there was more I didn’t post a pic of that one. Third time here is a pic. They are...
Wow. That looks like a major failure. It will be good to hear from them whether that is a one off issue or the result of a terminal design flaw. I’m surprised they didn’t ask you to return it for...
Dam, I think I’ll hold off on any exhaust at the moment. Hopefully the second one doesn’t do the same.
Good morning to all! I wanted to take a moment and share a positive experience with Mike at Aftermarket Assassins. I had always felt the 1500 3 cylinder should be able to make 150 hp and it can!! I purchased the tuner, stainless...
Is seatbelt clipped into center seatbelt clipped instead of drivers seatbelt clip i did that once by accident once in correct clipped no issues
Are you in Tow / Haul mode? 30 MPH is the max speed in that mode. Make sure it is in a different mode and try it again.
There’s many different brands out there. I’d look at transfer flow, weathergaurd, deezee, etc. Not sure if any have fork pockets that I’ve seen. I had a 40 gallon slip tank in the bed of my old...
Are you in Tow / Haul mode? 30 MPH is the max speed in that mode. Make sure it is in a different mode and try it again. Well I ran up to camp this afternoon and you were correct it was in...
I have a 2026 Mountaineer that has 30 miles on it. Everything was good to begin with but now it will not go over 30mph. No codes and no check engine light. I was at our camp two weekends ago and...
I used to never wear a seat belt, when they passed the law I was pissed. I was voicing my opinion to an Iowa State Patrol officer at a training I was at when he made me think about it differently...
Thanks for the info. So you got your tuner from them ? I didn't know they tuned .
Thanks for sharing Papa Hoc, there have not been a ton of discussions here on aftermarket tunes.
Thanks for the info. So you got your tuner from them ? I didn't know they tuned . Yes, they’re using HP tuners.
He's my rig. I don't need this much truck for it but i plan to get a big boat for lake superior soon
Have been a Polaris owner since they first came out with the UTV’s. Just traded in my 2019 Ranger XP 1000 for the XD 1500 Mountaineer. Have a small ranch that I use it for and...
Welcome to the forum! Looking forward to some good mountain riding pics in the future!
Welcome to the group Randy! Sounds like you have plenty of experience with UTV's so I'm sure you can fully appreciate just how nice the XD is. It looks like the Mountaineer was a solid choice for...
Welcome to the forum Randy, Enjoy the New Adventures (y)
Thinking to wire to bright lite switch Anyone try this. Dealer say should work using a relay and separate fuse
I have a rigid bar on my bumper, but it’s wired to a separate switch. I would think if you did it like the dealer says, then yes it should work. I’m looking at purchasing a light bar for my truck...