Electric Bed Dump Fuse

[GDMAC]

All new to the sight. Wonder if someone can help? I have a R 1500 XD Crew Northstar with the electric bed dump. My issue is I put oversize tires and an after market bumper on my XD. when you raise the dump bed to high the after market bumper gets lodged on the after market oversize tires and you have to loosen the bed bolts or take off thge tires to get the hydr bed cylinder to come down. I can use the bed because I'm careful but I'm afraid the kids or a friend will lock it up at a bad location. I would like to pull the fuse for the bed as long as it doesnt affect other ops. But I've tried several fuses and can't seem to find the one that controls the elec for the dump bed. Does anyone know what fuse or circuit breaker and its location that controls the elec to that bed?
Thanks

 

[Jerem62]

TF230006 - Ranger 1500 XD - Bed Actuator Relocation

Designed to work with the Thumper Fab Rear Winch Bumper for your Polaris Ranger XD 1500. The Bed Actuator Relocation Kit helps when running larger wheels and tires. Works with OEM electric bed lift. Bed tilt is reduced by 10 degrees.

thumperfab.com

 

[Jerem62]

Not sure on the fuse but, this may solve your problem.

 

[GDMAC]

Thanks I ordered that unit

 

[oneal]

I have been considering one of these as . I don't have a bumper but the actual bed has just 3/4" clearance on my 35's when fully extended but that is with no load in the machine.

 

[Mr.C]

Thanks jerem62, I also just ordered one.