Search results

Montana has rumble strips depressions between the lanes and at the edges. In the winter the DOT doesn't use salt but a sand/pebble mix. Over the winter these depressions fill up and then in the summer every times a car passes and crosses the rumble strip, the car behind or trailer is peppered...

In addition the air pressure and windshield wiper tend to hold in place

Pro Fab about 200 bucks, they have a good website check it out

1500 XD relaxing at NDR Ranch waiting for the next mission.

Thanks, think I will make a plate and mount between the two rails using the 3/8 strut nuts and mount the Rotopax in the middle of the plate.

Have horizontal Lock and Ride rails on the headache rack. Looking to hang gas and water from the rail. Suggestions on hardware to insert in the rail to hold the Rotopax hanging unit. Any suggestions appreciated .

thank you

Ordered headrests for the front seat and thought I was getting ultimate but came as premium. No faux leather cover just black plastic. Ultimate not available from Polaris and premium back ordered. Looked at the headrest there is a plastic " J " hook that once it slides in place there seems no...

Help cannot seem to remove, thanks

Thank you so much

My cab is tight. No real intrusion, but placed baffling in the door latch mechanism . If you can drop me a few of the pretty trails would be appreciated. We are in SW Montana and just looking for more places to explore. Thanks

Looking for suggestions for rides in Idaho in the central part of the state. Thanks

Consensus on best gas can holders that fit with lock and ride max rail. Hoping to place on the rail on the headache rack. Thanks

2000 lbs working load limit with a breaking limit of 4000 lbs. Since there a four separate tracks that is 8000 lbs working load. In addition to the screws I placed metal backing plates 6" by 6" on the bottom of the wood every 2 feet. Tried to place the plates where the idler, ratchet tie down...

Just finished putting E-tracks on the trailer for over the tire tie downs. There are relatively narrow and was hard to center the tires exactly. Put a reflector at the front of the trailer in the center of the E-tracks, have a small mark on the windshield, hold my head up straight, line all...

The plate goes under the bed on the left side with a traditional license plate holder. LED light for the plate.